FAQs

Q?
How much dust will be created during the restoration of my floor?
A.

There is no dust created during the restoration process, because we use diamond abrasives and water.

Q?
Recently a cleaning firm spilled a cleaner that is obviously acid on my marble vanities. They were sealed, but the damage is still very evident in the form of hundreds of small circles. What would you recommend as the way to repair them, the materials to use, etc? Would it be better to replace the vanities?
A.

Sealing DOES NOT prevent etching. Sealing your stone inhibits staining. You do not need to replace your vanity tops.

Q?
My Natural Stone countertops are no longer shiny. How do I get the shine back?
A.

Most of the time when a customer asks us why their countertop is not shiny anymore, it turns out that some sort of film is sitting on the surface. This happens when one does not use the proper cleanser, or when they clean their granite surface with water and dish soap. (This will eventually lead to soap film build up.) Give us a call. We can provide solutions for you.

Q?
Why won’t the water spots on my marble or travertine clean up?
A.

These are not water spots, but an etch mark in the surface of the stone. This is what happens when an acidic substance comes in contact with any calcium based stone.
To get rid of the etch marks, the stone will need to be polished out, much like a gemstone would have to be if it were scratched.

Q?
Is there routine, daily or weekly maintenance I should be performing?
A.

The #1 culprit of damage to floors is dirt, (grit, sand & dust). The best treatment for your floor is a dry, untreated microfiber dust mop or vacuum, used every day when possible. Damp mopping is recommended on a weekly basis and whenever there are visible spills.

Q?
I have a beautiful entry rug. Will it harm my stone floor?
A.

Rugs are a good idea to catch dirt and grit. However, there are a few things to keep in mind. It is important to use rug holders designed to go under rugs to keep them in place. Sliding rugs are not only dangerous, they are a constant source of new scratches. Do not use rugs that are backed with rubber or latex.

Q?
My floors had a beautiful shine when new. How can I restore that new shine?
A.

If your floor is not deeply scratched, surface polishing may bring back an acceptable shine. However, existing scratches may remain. If your floor has worn badly, a complete restoration is warranted. This decision should be made between you and us.

Q?
I have Marble Natural Stone floors in the kitchen. Some vinegar got on the floor and now we have a light spot. I believe that it is the sealer (polyurethane coating?) that got discolored. What is the best way to get rid of these dull spots and bring the normal shine back?
A.

When acid (vinegar) comes into contact with marble (calcium carbonate), it causes a chemical reaction. The result is called etching. Natural stone sealers penetrate the stone and do not prevent this natural reaction. If you do in fact have a polyurethane coat on top of your stone, then you have a different problem altogether. If the stone is etched, we can refinish it.

Q?
Do you charge an estimate fee?
A.

No. There may be an occasion, under special circumstances, that we may ask for this, but only if we tell you up front.

Q?
Where can I find information about caring for my stone?
A.

Please see our Stone Care Tips page. It provides a wealth of information pertaining to caring for your stone.

SUBSCRIBE

We won’t be bugging you, selling your contact info, or otherwise making you regret signing up. We will just be sending you an occasional message with articles and our digital magazine, Surface BUZZ, from time to time (you’ll love it, we promise!) and on occasion a little reminder that we are there for you for your surface care needs.